FIP Snooping Commands 903
feature fip-snooping
Use the feature fip-snooping command in Global Configuration mode to
globally enable Fibre Channel over Ethernet Initialization Protocol (FIP)
snooping on the switch. Use the no form of the command to return the
settings to the default values and disable FIP snooping.
Use the no form of the command to globally disable FIP snooping. When FIP
snooping is globally disabled, received FIP frames are forwarded or flooded
using the normal multicast rules. In addition, other FIP snooping commands
are not available until the FIP snooping feature is enabled.
Syntax
feature fip-snooping
no feature fip-snooping
Default Configuration
The default mode is off (FIP snooping feature is disabled).
Command Mode
Global Configuration mode
User Guidelines
When FIP snooping is disabled, received FIP frames are forwarded or flooded
using the normal multicast rules.
fip-snooping enable show fip-snooping sessions
fip-snooping fc-map show fip-snooping statistics
fip-snooping port-mode show fip-snooping vlan
show fip-snooping clear fip-snooping statistics
show fip-snooping enode
–
2CSPC4.X8100-SWUM102.book Page 903 Friday, March 15, 2013 8:56 AM