IPv6 Multicast Commands 1185
Command Mode
Global Configuration mode
User Guidelines
Only one of sparse or dense mode can be configured on a router.
Example
console(config)#ipv6 pim sparse
ipv6 pim spt-threshold
Use the ipv6 pim spt-threshold command to configure the Data Threshold
rate for the last-hop router to switch to the shortest path. Use the "no" form
of this command to set the data threshold to the default.
Syntax
ipv6 pim spt-threshold
threshold
no ipv6 pim spt-threshold
•
threshold
—The threshold rate (Range: 0–2000 Kbps).
Default Configuration
The default threshold rate is 0.
Command Mode
Global Configuration mode
User Guidelines
There are no user guidelines for this command.
Example
console(config)#ipv6 pim spt-threshold 1000
2CSPC4.X8100-SWUM102.book Page 1185 Friday, March 15, 2013 8:56 AM