422 Ethernet Configuration Commands
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode, Config mode and all Config sub-modes
User Guidelines
Port channels are only displayed if configured. Use the
show interfaces port-
channel
command to display configured and unconfigured port channels.
Interfaces configured as stacking ports will show as detached in the output of
the
show interfaces status
command.
Example
The following example displays the status for all configured interfaces.
console#show interfaces status
Port Description Duplex Speed Neg Link Flow Control
State Status
------- -------------- ------ ------- ---- ----- ------------
Tel/0/1 N/A Unknown Auto Down Inactive
Tel/0/2 N/A Unknown Auto Down Inactive
Tel/0/3 phone port N/A Unknown Auto Down Inactive
Description Description of the port.
Duplex Displays the port Duplex status.
Speed Refers to the port speed.
Neg Describes the Auto-negotiation status.
Link State Displays the Link Aggregation status, either Up or Down.
Flow Control
Status
Displays the Flow Control status, either Active or Inactive.
2CSPC4.X8100-SWUM102.book Page 422 Friday, March 15, 2013 8:56 AM