Address Table Commands 311
Secure addresses: 1
Dynamic addresses: 97
Internal addresses: 9
show mac address-table dynamic
Use the show mac address-table command in User EXEC or Privileged EXEC
mode to display all dynamic entries in the bridge-forwarding database.
Syntax
show mac address-table dynamic [address
mac-address
] [interface
interface-
id
] [vlan
vlan-id
]
Parameter Description
Default Configuration
This command has no default configuration.
Command Mode
User EXEC, Privileged EXEC mode, Config mode and all Config sub-modes
User Guidelines
This command has no user guidelines.
Example
In this example, all dynamic entries in the mac address-table are displayed.
console#show mac address-table dynamic
Parameter Description
mac-address A MAC address with the format xxxx.xxxx.xxxx.
interface-id Display information for a specific interface. Valid interfaces
include physical ports and port channels.
vlan-id Display entries for the specific VLAN only. The range is 1 to
4093.
2CSPC4.X8100-SWUM102.book Page 311 Friday, March 15, 2013 8:56 AM