Filter
Top Products
Command Groups 120
DHCP Server and Relay Agent (IPv4)
Command Description Mode
a
ip dhcp pool
Defines a DHCP address pool that can be used
to supply addressing information to DHCP
client. This command puts the user into DHCP
Pool Configuration mode.
GC
bootfile
Sets the name of the image for the DHCP
client to load.
DP
clear ip dhcp binding
Removes automatic DHCP server bindings. PE
clear ip dhcp conflict
Removes DHCP server address conflicts. PE
client-identifier
Identifies a a Microsoft
®
DHCP client to be
manually assigned an address.
DP
client-name
Specifies the host name of a DHCP client. DP
default-router
Sets the IPv4 address of one or more routers for
the DHCP client to use.
DP
dns-server (IP DHCP Pool
Config)
Sets the IPv4 DNS server address which is
provided to a DHCP client by the DHCP server.
DP
domain-name (IP DHCP
Pool Config)
Sets the DNS domain name which is provided
to a DHCP client by the DHCP server.
DP
hardware-address
Specifies the MAC address of a client to be
manually assigned an address.
DP
host
Specifies a manual binding for a DHCP client
host.
DP
ip dhcp bootp automatic
Enables automatic BOOTP address
assignments.
GC
ip dhcp conflict logging
Enables DHCP address conflict detection. GC
ip dhcp excluded-address
Excludes one or more DHCP addresses from
automatic assignment.
GC
ip dhcp ping packets
Configures the number of pings sent to detect if
an address is in use prior to assigning an address
from the DHCP pool.
GC
lease
Sets the period for which a dynamically
assigned DHCP address is valid.
DP
2CSPC4.X8100-SWUM102.book Page 120 Friday, March 15, 2013 8:56 AM