OSPF Commands 1279
Syntax
show ip ospf stub table
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode, Config mode and all Config sub-modes
User Guidelines
This command has no user guidelines.
Example
The following example displays the OSPF stub table.
console(config)#show ip ospf stub table
AreaId TypeofService Metric Val Import SummaryLSA
------------- ------------- ---------- -----------------
0.0.0.1 Normal 1 Enable
show ip ospf traffic
Use the show ip ospf traffic command in Privileged EXEC mode to display
OSPFv2 packet and LSA statistics and OSPFv2 message queue statistics.
Packet statistics count packets and LSAs since OSPFv2 counters were last
cleared (using the
clear ip ospf
counters command.)
NOTE: Note that the clear ip ospf counters command does not clear the message
queue high water marks.
Syntax
show ip ospf traffic
2CSPC4.X8100-SWUM102.book Page 1279 Friday, March 15, 2013 8:56 AM