OSPFv3 Commands 1329
---- -------- ---- -------- ----------------------- -----
INTRA 3.3.3.3 10 0.0.0.1 FE80::211:88FF:FE2A:3CB3 vlan11
INTRA 4.4.4.4 10 0.0.0.1 FE80::210:18FF:FE82:8E1 vlan12
show ipv6 ospf area
Use the show ipv6 ospf area command in Privileged EXEC mode to display
information about the area.
Syntax
show ipv6 ospf area
areaid
•
areaid
— Identifier for the OSPF area being displayed.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode, Config mode and all Config sub-modes
User Guidelines
This command has no user guidelines.
Example
The following example displays information about area 1.
console#show ipv6 ospf area 1
AreaID........................................ 0.0.0.1
External Routing.............................. Import External LSAs
Spf Runs...................................... 0
Area Border Router Count...................... 0
Area LSA Count................................ 0
Area LSA Checksum............................. 0
Stub Mode..................................... Disable
Import Summary LSAs........................... Enable
2CSPC4.X8100-SWUM102.book Page 1329 Friday, March 15, 2013 8:56 AM