Ethernet CFM Commands 451
show ethernet cfm maintenance-points remote
Use the show ethernet cfm maintenance-points remote command in
Privileged EXEC mode to display the configured remote maintenance points.
Syntax
show ethernet cfm maintenance-points remote {level
0-7
| domain
domain-
name
| detail [mac
mac-address
| mep
MEPId
] [domain
domain-name
|
level
0-7
] [vlan
vlan-id
]}
Parameter Description
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC, Config mode and all Config sub-modes
User Guidelines
This command has no user guidelines.
Example
console# show ethernet cfm maintenance-points remove level 1
------ ------- ----- ----------------- ---- ----------------- -----------
Parameter Description
domain Name of the maintenance domain (an alphanumeric string of
up to 43 characters in length).
level Maintenance association level
mac-address The destination MAC address for which the information is
desired.
vlan-id A VLAN associated with the maintenance domain. Range: 1-
4094.
mpid The MEP ID from which the link trace message is to be
transmitted.
2CSPC4.X8100-SWUM102.book Page 451 Friday, March 15, 2013 8:56 AM