910 FIP Snooping Commands
The following additional information is displayed when the optional
argument is supplied.
This command can only be entered after FIP snooping is enabled using the
feature fip-snooping
command. Otherwise, it does not appear in the CLI
syntax tree.
Example #1
The following example displays sample output of the command with no
optional argument supplied.
(switch)# show fip-snooping enode
Interface VLAN Name-ID ENode-MAC FCFs
Sessions
-----------------------------------------------------1/0/2
1 00000000 00:0c:29:65:82:bc 1 3
1/0/5 100 00000000 00:0d:31:23:53:11 2 5
Example #2
NameID Name of the ENode.
FIP-MAC MAC address of the ENode.
FCID Fiber channel ID number of the virtual port that was created by
FCF when the ENode logged into the network.
Sessions Established Number of successful virtual connections established.
Parameter Description
Sessions Waiting Number of virtual connections waiting for FCF acceptance.
Sessions Failed Number of virtual sessions failed.
Max-FCoE-PDU Maximum FCoE PDU size the ENode MAC intends to use for
FCoE traffic. This is equivalent to the maximum Ethernet
frame payload the ENode intends to send.
Time elapsed Time elapsed since first successful login session snooped from
the ENode.
Parameter Description
2CSPC4.X8100-SWUM102.book Page 910 Friday, March 15, 2013 8:56 AM