1168 Multicast Commands
Syntax
show ip pim interface [vlan
vlan-id
]
•
vlan-id
— A valid VLAN ID for which multicast routing has been enabled.
Field Descriptions
Default Configuration
There is no default configuration for this command.
Command Mode
User EXEC and Privileged EXEC modes, Config mode and all Config sub-
modes
User Guidelines
There are no user guidelines for this command.
Example
(console) #show ip pim interface
InterfaceVLAN0010
ModeSparse
Field Description
Mode Active PIM Protocol
Interface Interface number
Hello Interval Hello interval value
Join-prune Interval Join-prune interval value
DR Priority DR Priority configured on this interface
BSR Border Whether or not this interface is configured as a BSR Border
Neighbor Count Number of PIM Neighbors learnt on this interface
Designated-Router IP address of the elected DR on the interface
2CSPC4.X8100-SWUM102.book Page 1168 Friday, March 15, 2013 8:56 AM