536 IPv6 MLD Snooping Querier Commands
ipv6 mld snooping querier election participate
Use the ipv6 mld snooping querier election participate command to enable
the Snooping Querier to participate in the Querier Election process when it
discovers the presence of another Querier in the VLAN. When this mode is
enabled, if the Snooping Querier finds that the other Querier's source address
is numerically lower than the Snooping Querier's address, it stops sending
periodic queries. If the Snooping Querier wins the election then it will
continue sending periodic queries. Use the "no" form of this command to
disable election participation on a VLAN.
Syntax
ipv6 mld snooping querier election participate
vlan-id
no ipv6 mld snooping querier election participate
vlan-id
•
vlan-id
— A valid VLAN ID. (Range: 1 - 4093)
Default Configuration
Election participation is disabled by default.
Command Mode
VLAN Database mode
User Guidelines
If there is another querier in the network and the local querier is in election
mode, then the querier with the lower IP address is elected and the other
querier stops querying. If the local querier is not in election mode and
another querier is detected, the local querier stops querying.
Example
console(config-vlan)#ipv6 mld snooping querier election participate 10
2CSPC4.X8100-SWUM102.book Page 536 Friday, March 15, 2013 8:56 AM