1776 Web Server Commands
Parameter Description
Default Configuration
The default value of the certificate number is 1.
Command Mode
Global Configuration mode
User Guidelines
The HTTPS certificate is generated using the crypto certificate generate
command in Global Configuration mode.
Example
The following example configures the active certificate for HTTPS.
console(config)#ip http secure-certificate 1
ip http secure-port
Use the ip http secure-port command in Global Configuration mode to
configure a TCP port for use by a secure web browser to configure the switch.
To use the default port, use the no form of this command.
Syntax
ip http secure-port
port-number
no ip http secure-port
Parameter Description
Parameter Description
number Specifies the certificate number. (Range: 1–2)
Parameter Description
port-number
Port number for use by the secure HTTP server. (Range:
1–65535)
2CSPC4.X8100-SWUM102.book Page 1776 Friday, March 15, 2013 8:56 AM