VLAN Commands 795
with the group, this command fails and the interface(s) are not added to the
group. Ensure that the referenced VLAN is created prior to the creation of the
protocol-based group except when GVRP is expected to create the VLAN.
To remove all interfaces from this protocol-based group that is identified by
this
groupid
, use
the no form of the command
Syntax
protocol vlan group all
groupid
no protocol vlan group all
groupid
•
groupid
— The protocol-based VLAN group ID, which is automatically
generated when you create a protocol-based VLAN group with the
vlan
protocol group
command. To see the group ID associated with the name
of a protocol group, use the
show port protocol all
command.
Default Configuration
This command has no default configuration.
Command Mode
Global Configuration mode
User Guidelines
This command has no user guidelines.
Example
The following example displays how to add all physical interfaces to the
protocol-based group identified by group ID "2."
console(config)#protocol vlan group all 2
show dvlan-tunnel
Use the show dvlan-tunnel command in Privileged EXEC mode to display all
interfaces enabled for Double VLAN Tunneling.
Syntax
show dvlan-tunnel
2CSPC4.X8100-SWUM102.book Page 795 Friday, March 15, 2013 8:56 AM