1126 IPv6 Routing Commands
show ipv6 mld-proxy groups detail
Use the show ipv6 mld-proxy groups detail command to display information
about multicast groups that MLD Proxy reported.
Syntax
show ipv6 mld-proxy groups detail
Default Configuration
There is no default configuration for this command.
Command Mode
Privileged EXEC, Config mode and all Config sub-modes
User Guidelines
The following parameters are displayed by this command:
Field Description
Interface The interface number of the MLD-Proxy.
Group Address The IP address of the multicast group.
Last Reporter The IP address of the host that last sent a membership report for
the current group on the network attached to the MLD Proxy
interface (upstream interface).
Up Time (in
secs)
The time elapsed in seconds since last created.
Member State Possible values are:
• Idle_Member—The interface has responded to the latest group
membership query for this group.
• Delay_Member—The interface is going to send a group
membership report to respond to a group membership query for
this group.
Filter Mode Possible values are Include or Exclude.
Sources The number of sources attached to the multicast group.
2CSPC4.X8100-SWUM102.book Page 1126 Friday, March 15, 2013 8:56 AM