Syslog Commands 1669
Example
The following example limits syslog messages collected in the internal buffer
to those of severity level "error" and above (numerically lower).
console(config)#logging buffered error
logging console
Use the logging console command in Global Configuration mode to limit
messages logged to the console based on severity. To disable logging to the
console terminal, use the no form of this command.
Syntax
logging console [
severity–level
]
no logging console
Parameter Description
Default Configuration
The default value for
level
is
warnings.
Command Mode
Global Configuration mode
Parameter Description
severity–level
(Optional) The number or name of the desired severity level.
Range:
[0 | emergencies]
[
1 | alerts]
[
2 | critical]
[
3 | errors]
[
4 | warnings]
[
5 | notifications]
[
6 | informational]
[
7 | debugging]
2CSPC4.X8100-SWUM102.book Page 1669 Friday, March 15, 2013 8:56 AM