Filter
Top Products
Command Groups 131
ip pim dr-priority
Administratively configures the advertised
designated router (DR) priority value.
IC
ip pim hello-interval
Administratively configures the PIM Hello
messages on the specified interface.
IC
ip pim join-prune-interval
Administratively configures the frequency of
join/prune messages on the specified interface.
IC
ip pim rp-address
Defines the address of a PIM RP for a specific
multicast group range.
GC
ip pim rp-candidate
Configures the router to advertise itself to the
bootstrap router (BSR) as a PIM candidate
rendezvous point (RP) for a specific multicast
group range.
IC
ip pim sparse
Administratively configures PIM sparse mode
for IP multicast routing.
GC
ip pim ssm
Administratively configures PIM Source
Specific Multicast (SSM) range of addresses for
IP multicast routing.
GC
show ip multicast
Displays the system-wide multicast
information.
PE
show ip mcast boundary
Displays the system-wide multicast
information.
PE
show ip multicast interface
Displays the multicast information for the
specified interface.
PE
show ip mcast mroute
Displays a summary or all the details of the
multicast table.
PE
show ip mcast mroute group
Displays the multicast configuration settings of
entries in the multicast mroute table.
PE
show ip mcast mroute
source
Displays the multicast configuration settings of
entries in the multicast mroute table.
PE
show ip mcast mroute static
Displays all the static routes configured in the
static mcast table.
PE
show ip pim bsr-router
Displays the bootstrap router (BSR)
information.
PE
Command Description Mode
a
2CSPC4.X8100-SWUM102.book Page 131 Friday, March 15, 2013 8:56 AM