656 QoS Commands
Command Mode
Policy-Class-Map Configuration mode
User Guidelines
This command has no user guidelines.
Example
The following example displays how to mark all packets with an IP DSCP
value of "cs4."
console(config-policy-classmap)#mark ip-dscp cs4
mark ip-precedence
Use the mark ip-precedence command in Policy-Class-Map Configuration
mode to mark all packets for the associated traffic stream with the specified
IP precedence value.
Syntax
mark ip-precedence
prec-value
•
prec-value
— Specifies the IP precedence value as an integer. (Range: 0–7)
Default Configuration
This command has no default configuration.
Command Mode
Policy-Class-Map Configuration mode
User Guidelines.
This command has no user guidelines.
Example
The following example displays
console(config)#policy-map p1 in
console(config-policy-map)#class c1
2CSPC4.X8100-SWUM102.book Page 656 Friday, March 15, 2013 8:56 AM