580 LLDP Commands
console#show lldp
LLDP transmit and receive disabled on all interfaces
show lldp interface
Use the show lldp interface command in Privileged EXEC mode to display
the current LLDP interface state.
Syntax
show lldp interface {gigabitethernet unit/slot/port
| tengigabitethernet
unit/slot/port | fortygigabitethernet unit/slot/port| all}
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode, Config mode and all Config sub-modes
User Guidelines
This command has no user guidelines.
Examples
This example show how the information is displayed when you use the
command with the all parameter.
console#show lldp interface all
Interface Link Transmit Receive Notify TLVs Mgmt
--------- ---- -------- -------- -------- ------- ----
1/0/1 Up Enabled Enabled Enabled 0,1,2,3 Y
1/0/2 Down Enabled Enabled Disabled Y
1/0/3 Down Disabled Disabled Disabled 1,2 N
TLV Codes: 0 – Port Description, 1 – System Name, 2 – System
Description, 3 –
System Capability
2CSPC4.X8100-SWUM102.book Page 580 Friday, March 15, 2013 8:56 AM