898 Data Center Bridging Commands
Syntax
show interfaces traffic-class-group [<interface-id>]
Parameter Description
Default Configuration
The default is to show the global traffic class group configuration.
Command Mode
Privileged EXEC mode
User Guidelines
The <interface-id> parameter is optional. If specified, the TCG mapping
table of the interface is displayed. If omitted, the global configuration settings
are displayed (these may have been subsequently overridden by per-port
configuration).
The following information is displayed:
Parameter Description
interface-id A valid physical interface specifier.
Field Description
Interface Displays the slot/port of the interface. If displaying the global
configuration, this output line is replaced with a Global Config
indication.
Traffic Class Group The traffic class Group identifier.
Min-Bandwidth The minimum transmission bandwidth, expressed as a
percentage. A value of 0 means bandwidth is not guaranteed.
This is a configured value.
Max-Bandwidth The maximum transmission bandwidth g, expressed as a
percentage. A value of 0 means no upper limit is enforced, so
the queue may use any or all of the available bandwidth of the
interface. This is a configured value.
2CSPC4.X8100-SWUM102.book Page 898 Friday, March 15, 2013 8:56 AM