Filter
Top Products
1212 OSPF Commands
Syntax
area area-id virtual-link router-id
[
authentication
[
message-digest
|
null
]]
[
hello-interval seconds
]
[
retransmit-interval seconds
]
[
transmit-delay
seconds
]
[
dead-interval seconds
]
[[
authentication-key key
] | [
message-
digest-key key-id md5 key
]]
no
area area-id virtual-link router-id
[
authentication
[
message-digest
|
null
]]
[
hello-interval
]
[
retransmit-interval
]
[
transmit-delay
]
[
dead-interval
]
[[
authentication-key
] | [
message-digest-key
]]
Parameter Description
Parameter Description
area-id Identifies the OSPF stub area to configure. (Range: IP address
or decimal from 0-4294967295)
router-id Valid IP address.
authentication Specifies authentication type.
message-digest Specifies that message-digest authentication is used.
null No authentication is used. Overrides password or message-
digest authentication if configured for the area.
hello-interval
seconds
Number of seconds to wait before sending hello packets to the
OSPF virtual interface. (Range: 1–65535)
dead-interval
seconds
Number of seconds to wait before the OSPF virtual interface on
the virtual interface is assumed to be dead. (Range: 1–65535)
retransmit-interval
seconds
The number of seconds to wait between retransmitting LSAs if
no acknowledgement is received. (Range: 0–3600)
transmit-delay
seconds
Number of seconds to increment the age of the LSA before
sending, based on the estimated time it takes to transmit from
the interface. (Range: 0–3600)
md5 Use MD5 Encryption for an OSPF Virtual Link.
key Authentication key for the specified interface. (Range: 8 bytes
or less if the authentication type is simple and 16 bytes or less if
the type is encrypt.)
key-id Authentication key identifier for the authentication type
encrypt. (Range: 0–255)
2CSPC4.X8100-SWUM102.book Page 1212 Friday, March 15, 2013 8:56 AM