1114 IPv6 Routing Commands
show ipv6 interface
Use the show ipv6 interface command in Privileged EXEC mode to show the
usability status of IPv6 interfaces. The output of the command includes the
method of assignment for each IPv6 address that is either autoconfigured or
leased from a DHCP server. Global addresses with no annotation are assumed
to be manually configured.
Syntax
show ipv6 interface [brief] [loopback loopback-id | tunnel tunnel-id | vlan
vlan-id [prefix]]
Syntax Description
Default Configuration
Displays all IPv6 interfaces.
Command Mode
User EXEC, Privileged EXEC modes, Config mode and all Config sub-modes
User Guidelines
The Method field contains one of the following values.
Parameter Description
loopback-id Valid loopback interface ID
tunnel-id Valid tunnel interface ID
vlan-id Valid VLAN ID
prefix Display IPv6 Interface Prefix Information.
Field Description
Auto The IPv6 address is automatically generated using IPv6 auto
address configuration (RFC 2462).
Config The IPv6 address is manually configured.
DHCP The IPv6 address is leased from a DHCP server.
2CSPC4.X8100-SWUM102.book Page 1114 Friday, March 15, 2013 8:56 AM