858 802.1x Commands
Session Termination Action..................... Default
show dot1x interface
This command shows the status of MAC Authentication Bypass. This feature
is an extension of Dot1x Option 81 feature added in Power Connect Release
2.1. to accept a VLAN name as an alternative to a number when RADIUS
indicates the Tunnel-Private-Group-ID for a supplicant.
Syntax
show dot1x interface {gigabitethernet unit/slot/port| tengigabitethernet
unit/slot/port | fortygigabitethernet unit/slot/port}
Default Configuration
There is no default configuration for this command.
Command Mode
Privileged EXEC mode, Config mode and all Config sub-modes
User Guidelines
There are no user guidelines for this command.
Example
console#show dot1x interface gigabitethernet 1/0/10
Administrative Mode............... Disabled
Dynamic VLAN Creation Mode........ Disabled
Monitor Mode...................... Disabled
Port Admin Oper Reauth Reauth
Mode Mode Control Period
------- ------------------ ------------ -------- ----------
Gi1/0/10 auto N/A FALSE 3600
Quiet Period................................... 60
2CSPC4.X8100-SWUM102.book Page 858 Friday, March 15, 2013 8:56 AM