Data Center Bridging Commands 897
Command Mode
Privileged EXEC mode
User Guidelines
The <interface-id> parameter is optional. If specified, the TCG mapping
table of the interface is displayed. If omitted, the global configuration settings
are displayed (these may have been subsequently overridden by per-port
configuration).
Traffic class group 7 is reserved by the system and is not shown.
Auto-configuration ports utilize the traffic class group mappings received
from the auto-configuration source. Manually configured ports enabled for
DCBX transmit the traffic class groups in the ETS TLVs.
Example
The following example demonstrates how to display the global traffic class to
group mappings:
s1# show classofservice traffic-class-group
Traffic Class Traffic Class Group
------------- ---------------------
0 0
1 1
2 1
3 1
4 2
5 1
6 1
show interfaces traffic-class-group
Use the show interfaces traffic-class-group command in Privileged EXEC
mode to display the Traffic Class to Traffic Class Group mapping.
2CSPC4.X8100-SWUM102.book Page 897 Friday, March 15, 2013 8:56 AM