Ethernet Configuration Commands 419
Default Configuration
This command has no default configuration.
Command Mode
User EXEC mode, Config mode and all Config sub-modes
User Guidelines
This command has no user guidelines.
Example
The following example displays the description for all interfaces.
console>show interfaces description
Port Description
---- ------------------------------------------------
1/0/1 Port that should be used for management only
2/0/1
2/0/2
Ch Description
---- -----------
1 Output
show interfaces detail
Use the show interfaces detail command in Privileged EXEC mode to display
detailed status and configuration of the specified interface.
Syntax
show interfaces detail <interface-id>
Field Description
2CSPC4.X8100-SWUM102.book Page 419 Friday, March 15, 2013 8:56 AM