Port Channel Commands 619
Example
console(config)#interface port-channel l
console(config-if-po1)#hashing-mode 4
console(config-if-po1)#no hashing mode
lacp port-priority
Use the lacp port-priority command in Interface Configuration mode to
configure the priority value for physical ports. To reset to default priority
value, use the no form of this command.
Syntax
lacp port-priority
value
no lacp port-priority
•
value
— Port priority value. (Range: 1–65535)
Default Configuration
The default port priority value is 1.
Command Mode
Interface Configuration (Ethernet) mode
User Guidelines
This command has no user guidelines.
Example
The following example configures the priority value for port 1/0/8 to 247.
console(config)#interface gigabitethernet 1/0/8
console(config-if-1/0/8)#lacp port-priority 247
2CSPC4.X8100-SWUM102.book Page 619 Friday, March 15, 2013 8:56 AM