310 Address Table Commands
---- -------------- -------- -------------
1 0000.E26D.2C2A Dynamic 1/0/1
show mac address-table count
Use the show mac address-table count command in User EXEC or Privileged
EXEC mode to display the number of addresses present in the Forwarding
Database.
Syntax
show mac address-table count [vlan
vlan-id
| interface
interface-id
]
Parameter Description
Default Configuration
This command has no default configuration.
Command Mode
User EXEC, Privileged EXEC mode, Config mode and all Config sub-modes
User Guidelines
This command has no user guidelines.
Example
The following example displays the addresses in the Forwarding Database:
console#show mac address-table count
Capacity: 8192
Used: 109
Static addresses: 2
Parameter Description
interface-id
Specify an interface type; valid interfaces include physical ports
and port channels.
vlan-id
Specify a valid VLAN, the range is 1 to 4093.
2CSPC4.X8100-SWUM102.book Page 310 Friday, March 15, 2013 8:56 AM