Address Table Commands 313
Example
In this example, all classes of entries in the bridge-forwarding database for
gigabit Ethernet interface 1/0/1 are displayed.
console#show mac address-table interface
gigabitethernet 1/0/1
Aging time is 300 Sec
Vlan Mac Address Type Port
---- -------------- ---- -------------
1 0000.0001.0000 Dynamic gi1/0/1
1 0000.8420.5010 Dynamic gi1/0/1
1 0000.E26D.2C2A Dynamic gi1/0/1
1 0000.E89A.596E Dynamic gi1/0/1
1 0001.02F1.0B33 Dynamic gi1/0/1
show mac address-table static
Use the show mac address-table static command in User EXEC or Privileged
EXEC mode to display static entries in the bridge-forwarding database.
Syntax
show mac address-table static [address
mac-address
] [interface
interface-id
]
[vlan
vlan-id
]
Parameter Description
Parameter Description
mac-address A MAC address with the format xxxx.xxxx.xxxx.
interface-id Specify an interface type; valid interfaces include physical ports
and port channels.
vlan-id Specify a valid VLAN; the range is 1 to 4093.
2CSPC4.X8100-SWUM102.book Page 313 Friday, March 15, 2013 8:56 AM