Filter
Top Products
Captive Portal Commands 1431
Syntax
show captive-portal client [
macaddr
] status
•
macaddr
—Client MAC address.
Default Configuration
There is no default configuration for this command.
Command Mode
Privileged EXEC mode, Config mode and all Config sub-modes
User Guidelines
There are no user guidelines for this command.
Example
console#show captive-portal client status
Client MAC Address Client IP Address Protocol Verification Session Time
------------------ ----------------- -------- ------------ ------------
0002.BC00.1290 10.254.96.47 https Local 0d:00:01:20
0002.BC00.1291 10.254.96.48 https Local 0d:00:05:20
0002.BC00.1292 10.254.96.49 https Radius 0d:00:00:20
console#show captive-portal client 0002.BC00.1290 status
Client MAC Address........................ 0002.BC00.1290
Client IP Address......................... 10.254.96.47
Protocol Mode............................. https
Verification Mode......................... Local
CP ID..................................... 1
CP Name................................... cp1
Interface................................. 1/0/1
Interface Description..................... Unit: 1 Slot: 0 Port: 1 Gigabit -
Level
User Name................................. user123
Session Time.............................. 0d:00:00:13
show captive-portal configuration client status
Use the show captive-portal configuration client status command to display
the clients authenticated to all captive portal configurations or a to specific
configuration.
2CSPC4.X8100-SWUM102.book Page 1431 Friday, March 15, 2013 8:56 AM