1160 Multicast Commands
Syntax
show ip multicast
Syntax Description
This command has no arguments or keywords.
Default Configuration
This command has no default configuration.
Command Mode
User EXEC, Privileged EXEC modes, Config mode and all Config sub-modes
User Guidelines
This command has no user guidelines.
Example
The following example displays system-wide multicast information.
console#show ip multicast
Admin Mode........................... Enabled
Protocol State....................... Non-Operational
Table Max Size.......................... 256
Protocol................................. PIMDM
Multicast Forwarding Cache Entry Count.. 0
show ip mcast boundary
Use the show ip mcast boundary command in Privileged EXEC mode to
display all the configured administrative scoped multicast boundaries.
Syntax
show ip mcast boundary {vlan
vlan-id
| all}
•
vlan-id
— Valid VLAN ID.
2CSPC4.X8100-SWUM102.book Page 1160 Friday, March 15, 2013 8:56 AM