Filter
Top Products
OSPF Commands 1269
OSPF Admin Mode................................ Enable
OSPF Area ID................................... 0.0.0.0
OSPF Network Type.............................. Broadcast
Router Priority................................ 1
Retransmit Interval............................ 5
Hello Interval................................. 10
Dead Interval.................................. 40
LSA Ack Interval............................... 1
Iftransit Delay Interval....................... 1
Authentication Type............................ None
Metric Cost.................................... 10 (computed)
Passive Status................................. Non-passive
interface
OSPF Mtu-ignore................................ Disable
State.......................................... designated-router
Designated Router.............................. 1.1.1.1
Backup Designated Router....................... 0.0.0.0
Number of Link Events.......................... 2
Example #2
The following example shows the configuration of flood blocking.
console#show ip ospf interface gi2/0/11
IP Address........................... 172.20.11.2
Subnet Mask.......................... 255.255.255.0
Secondary IP Address(es).............
OSPF Admin Mode...................... Enable
OSPF Area ID......................... 0.0.0.0
OSPF Network Type.................... Point-to-Point
Router Priority...................... 1
Retransmit Interval.................. 5
Hello Interval....................... 3
2CSPC4.X8100-SWUM102.book Page 1269 Friday, March 15, 2013 8:56 AM