856 802.1x Commands
Parameter Description
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode, Config mode and all Config sub-modes
User Guidelines
The following fields are displayed by this command.
The following table describes the significant fields shown in the display.
Parameter Description
interface–id
Any valid interface. See
Interface Naming Conventions
for
interface representation.
Field Description
Clients
Authenticated using
Monitor Mode
Indicates the number of Dot1x clients authenticated using
Monitor mode.
Clients
Authenticated using
Dot1x
Indicates the number of Dot1x clients authenticated using
802.1x authentication process.
Field Description
Interface The port number.
Username The username representing the identity of the Supplicant.
This field shows the username when the port control is
auto or mac-based. If the port is Authorized, it shows the
username of the current user. If the port is unauthorized it
shows the last user that was authenticated successfully.
Supp MAC Address The MAC-address of the supplicant
Session Time The amount of time, in seconds, since the client was
authenticated on the port.
2CSPC4.X8100-SWUM102.book Page 856 Friday, March 15, 2013 8:56 AM