Filter
Top Products
System Management Commands 1723
Up Time........................... 0 days 0 hrs 32 mins 55 secs
The following table describes the fields in the example.
Unit Description
Switch This field displays the unit identifier assigned to
the switch.
Management Status This field indicates whether the switch is the
Management Switch, a stack member, or the
status is unassigned.
Admin Management Preference This field indicates the administrative
management preference value assigned to the
switch. This preference value indicates how
likely the switch is to be chosen as the
Management Switch.
Switch Type This field displays the 32-bit numeric switch
type.
Model Identifier This field displays the model identifier for this
switch. Model Identifier is a 32-character field
assigned by the switch manufacturer to identify
the switch.
Switch Status This field displays the switch status. Possible
values are OK, Unsupported, Code Mismatch,
Config Mismatch, or Not Present.
Switch Description This field displays the switch description.
Detected Code Version This field displays the version of code running
on this switch. If the switch is not present and
the data is from preconfiguration, the code
version is "None."
Detected Code in Flash This field displays the version of code that is
currently stored in FLASH memory on the
switch. This code will execute after the switch is
reset. If the switch is not present and the data is
from pre-configuration, then the code version is
"None."
SFS Last Attempt Status This field displays the Stack Firmware
Synchronization status.
2CSPC4.X8100-SWUM102.book Page 1723 Friday, March 15, 2013 8:56 AM