Data Center Bridging Commands 883
User Guidelines
In order to reduce configuration flapping, ports that obtain configuration
information from a configuration source port will maintain that configuration
for 2x the LLDP time out, even if the configuration source port becomes
operationally disabled.
Examples
This example configures an FCF facing port:
console(config-if-Te1/1/1)#lldp dcbx port-role auto-up
This example configures an FCoE host facing port:
console(config-if-Te1/1/1)#lldp dcbx port-role auto-down
show lldp tlv-select
Use the lldp tlv-select command in Privileged EXEC mode to display the
Traffic Class to Traffic Class Group mapping.
Syntax
show lldp tlv-select interface <all|interface-id>
Parameter Description
Default Configuration
The default is to show the per interface TLV configuration.
Command Mode
Privileged EXEC
User Guidelines
This command has no user guidelines.
Parameter Description
Interface-id A valid physical interface specifier
all All interfaces
2CSPC4.X8100-SWUM102.book Page 883 Friday, March 15, 2013 8:56 AM