Filter
Top Products
Using the CLI 181
member ports as a single entity. The Global Configuration mode
command
interface port-channel
port-channel-number
is used to enter
the Port Channel mode.
•
Tu nne l
— Contains commands to manage tunnel interfaces. The Global
Configuration mode command
interface tunnel
enters the Tunnel
Configuration mode to configure an tunnel type interface.
•
Loopback
— Contains commands to manage loopback interfaces. The
Global Configuration mode command
interface loopback
enters the
Loopback Configuration mode to configure an loopback type interface.
•
SSH Public Key-chain
— Contains commands to manually specify other
switch SSH public keys. The Global Configuration mode command
crypto
key pub-key chain ssh
is used to enter the SSH Public Key-chain
configuration mode.
•
SSH Public Key-string
— Contains commands to manually specify the
SSH Public-key of a remote SSH Client. The SSH Public-Key Chain
Configuration mode command
user-key
command is used to enter the
SSH Public-Key Configuration mode
.
•
MAC Access-List
— Configures conditions required to allow traffic based
on MAC addresses. The Global Configuration mode command
mac-
access-list
is used to enter the MAC Access-List configuration mode.
•
TACACS
— Configures the parameters for the TACACS server.
•
Radius
— Configures the parameters for the RADIUS server.
•
SNMP Host Configuration
— Configures the parameters for the SNMP
server host.
•
Crypto Certificate Request
— Configures the parameters for crypto
certificate request.
•
Crypto Certificate Generation
— Configures the parameters for crypto
certificate generate.
•
Logging
— Configures the parameters for syslog log server.
•
Datacenter-Bridging
— Contains priority-flow-control commands. The
datacenter-bridging command for an ethernet or port-channel interface is
used to enter the DataCenterBridging mode.
2CSPC4.X8100-SWUM102.book Page 181 Friday, March 15, 2013 8:56 AM