Filter
Top Products
123
www.gateway.com
Processors
6 If you are removing the VRM for the fourth processor, remove the VRM air baffle by
pushing down on the top of the baffle and pulling the baffle away at an angle from
the center brace.
7 Gently spread the retaining clips at each end of the VRM socket which makes the
VRM pop up from the socket.
8 Holding the VRM by the edges, remove it from the socket.
9 Place the VRM into an anti-static bag for storage.
10 Reinstall the VRM air baffle, if you removed it.
11 Replace the fibre channel module by following the instructions in “Installing or
removing the fibre channel module” on page 108.
12 Replace the memory boards or memory board air baffles into memory slots C and D
by following the instructions in “Installing and removing memory boards” on
page 85.
13 Replace the processor air baffle by following the instructions in “Removing and
installing the processor air baffle” on page 67.
14 Follow the instructions in “Closing the server case” on page 72.
8510702.book Page 123 Thursday, July 7, 2005 11:21 AM