Filter
Top Products
124
www.gateway.com
Chapter 4: Installing Components
Installing an Intel Management Module
(IMM)
To install an Intel Management Module (IMM):
1 Uninstall the Gateway Server Manager (GSM) software from your server.
2 Follow the instructions in “Preventing static electricity discharge” on page 65.
3 Follow the instructions in “Opening the server case” on page 66.
4 Remove the processor air baffle by following the instructions in “Removing and
installing the processor air baffle” on page 67.
5 Remove the memory boards or memory board air baffles from slots A and B, by
following the instructions in “Installing and removing memory boards” on page 85.
6 Install the nylon standoff into the hole in the IMM module board which corresponds
to the hole in the system board (see the illustration on page 125).
Important
The snap fit end of the standoff go into the hole in the IMM module
board. The snap lock end of the standoff go into hole in the system
board.
Snap fit end goes into
IMM board.
Snap lock end goes
into system board.
8510702.book Page 124 Thursday, July 7, 2005 11:21 AM