Filter
Top Products
84
www.gateway.com
Chapter 4: Installing Components
Removing and installing the control
panel
Removal and installation of the control panel and front panel board is the same, regardless
of whether your server is equipped with the standard control panel or the optional local
control panel (LCP).
To remove and install the control panel:
1 Follow the instructions in “Preventing static electricity discharge” on page 65.
2 Follow the instructions in “Opening the server case” on page 66.
3 Disconnect the front panel cable from the front panel board attached to the back of
the control panel.
4 Push the control panel out through the face plate of the server and store it in an
anti-static bag.
5 Push the new control panel into the control panel opening in face plate of the server
until it is securely seated.
6 Connect the front panel cable to the back of the front panel board located on the
back of the control panel.
7 Follow the instructions in “Closing the server case” on page 72.
8510702.book Page 84 Thursday, July 7, 2005 11:21 AM