Filter
Top Products
23
www.gateway.com
Controlling your server
To configure the console:
1 Turn on the console system and let the operating system start.
2 Click Start, All Programs, Accessories, Communications, then click Hyperterminal.
3 When the Connection Description window opens, enter Guest in the Name field, then
click
OK.
4 When the Connect To window opens, click the COM port of the console to which the
null modem cable is connected (for example, COM1).
5 When the COM1 Properties window opens, make the following settings:
■ Bits per second to 115200
■ Flow control to Hardware (CTS/RTS)
■ Leave the other settings at their default values
6 Click OK to accept the settings and enter the hyperterminal screen.
7 Turn on the server. The console starts displaying the redirection after the video on
the server synchronizes.
8510702.book Page 23 Thursday, July 7, 2005 11:21 AM