Filter
Top Products
50
www.gateway.com
Chapter 3: Managing and Maintaining Your Server
12 Move the shorting block from pins 1-2 to pins 2-3 on the Boot Block Update jumper
(J1B1) on the IMM module.
13 Follow the instructions in “Closing the server case” on page 72.
14 Restart your server, then press any key when the Gateway logo screen appears during
startup. The System Options menu opens.
15 Select BIOS Setup utility, then press ENTER. The BIOS Setup utility opens.
16 Use the down arrow key to select Boot Manager, then press ENTER. The Boot Option menu
opens.
17 Select your normal boot drive from the list, then press ENTER. The server will now
boot normally.
Embedded Web Server
The Embedded Web Server has six firmware-resident Web pages:
■ System Summary Page—displays the overall system health and health indicators for
individual sensors.
■ System Event Log—displays selected number of records from the System Event Log
■ Power—provides power and reset controls
■ IPMI Command—accepts IPMI hex commands or Native CLI commands and returns
a response
■ Configuration—provides configuration controls for the embedded web server
■ Help—provides on-line help
Each page has navigation links on the left side for quick navigation to another page, plus
an overall health indicator (directly above the navigation links).
Configuring the Embedded Web Server
To assign an IP address to the IMM advanced module:
1 Install GSM on the server agent. For more information on GSM, see “Gateway Server
Manager” on page 36.
2 Open the GSM application.
8510702.book Page 50 Thursday, July 7, 2005 11:21 AM