Filter
Top Products
143
www.gateway.com
Replacing the front panel I/O board
Replacing the front panel I/O board
To replace the front panel I/O board:
1 Follow the instructions in “Preventing static electricity discharge” on page 65.
2 Follow the instructions in “Opening the server case” on page 66.
3 Remove the processor air baffle by following the instructions in “Removing and
installing the processor air baffle” on page 67.
4 Disconnect the front panel I/O board and control panel cables from the front panel
board.
5 Loosen the blue, captive thumbscrew in the center of the front panel I/O board, then
slide the board back until the mounting tabs disengage from the board.
6 Remove the board from the server and store it in an anti-static bag.
Blue, captive thumbscrew
Mounting
tab
8510702.book Page 143 Thursday, July 7, 2005 11:21 AM