Filter
Top Products
74
www.gateway.com
Chapter 4: Installing Components
2 Follow the instructions in “Opening the server case” on page 66.
3 Remove the processor air baffle by following the instructions in “Removing and
installing the processor air baffle” on page 67.
4 Disconnect the SATA and power cables from the SATA-to-IDE converter board on the
back of the CD or DVD drive.
5 Remove the front panel cable from the SCSI hot-swap backplane by following the
instructions in “Replacing the SCSI hot-swap backplane” on page 139.
6 Press the blue release latch on the back of the CD/DVD drive carrier, then slide the
drive carrier assembly out the opening in the front panel.
S
ATA-to-I DE
converter board
8510702.book Page 74 Thursday, July 7, 2005 11:21 AM