Filter
Top Products
200
www.gateway.com
Chapter 7: Troubleshooting
Additional beep codes provided by Intel Management
Modules
In addition to the beep codes above, the following additional beep codes are provided by
the Intel Management Module:
4 Recovery complete FFh BIOS recovery succeeded, ready
for power-down and reboot.
Beep Codes Description
1 Control panel CMOS clear has been initiated
1-5-1-1 Processor failure. Reseat or replace the failed processor.
1-5-2-1 No processor is installed or the CPU 1 socket is empty. Reseat or
replace the failed processor.
1-5-2-2 No processors
1-5-2-3 Processor configuration error or CPU 1 socket is empty. Reseat or
replace the failed processor. In a two-processor system, make sure
the processors are identical.
1-5-2-4 Front-side bus select configuration error.
1-5-4-2 DC power unexpectedly lost.
Beeps Error Message POST Progress Code Description
8510702.book Page 200 Thursday, July 7, 2005 11:21 AM