Filter
Top Products
29
www.gateway.com
Configuring SCSI features
4 Use the up and down arrow keys to select one of the following options:
■ Cancel Exit - To cancel the exit and return to the adapter or device properties screen.
■ Save Changes then exit this menu - To save your changes and exit the menu.
■ Discard changes then exit this menu - To discard your changes and exit the menu.
■ Exit the Configuration Utility - To exit the utility entirely.
If you made changes, the system will reboot when you exit the utility.
To access and change the Global Properties List:
1 Follow the instructions in “To access the LSI Logic MPT SCSI Setup Utility:” on page 27.
2 Press F2 to access the menu bar at the top of the screen, then press the HOME and
E
ND keys to select the Global Properties List. The Global Properties List screen opens.
3 Use the up and down arrow keys to select options from the list and +/- to change
the settings:
■ Pause when boot alert displayed (Yes or No)
■ Boot information display mode (Verbose or Terse)
■ Negotiate with Devices (Supported or All)
■ Video Mode (Color or Monochrome)
8510702.book Page 29 Thursday, July 7, 2005 11:21 AM