Filter
Top Products
166
www.gateway.com
Chapter 6: Configuring your RAID solutions
To configure your ROMB RAID solution:
1 Restart the server.
2 When the server reboots, hold the CTRL key and press G when the following message
appears:
Press <Ctrl>-<G> for BIOS Console
The BIOS Console opens at the Adapter Selection screen.
3 Select an adapter from the list, then click Start to begin the configuration process.
The Configuration Wizard screen opens.
Click on this icon to scan for adapters connected to your
system.
Click on this icon to display the properties of the adapter,
such as the firmware version, BIOS version, RAM size,
and initiator ID.
Click on the icon to access the Configuration Wizard so
that you can configure the arrays and logical drives.
Click on this icon to silence the sound on the alarm.
Icon Description
8510702.book Page 166 Thursday, July 7, 2005 11:21 AM