Filter
Top Products
5 Replace the output tray.
Load postcards or Hagaki cards
You can load postcards or Hagaki cards into the input tray of your HP all-in-one.
For the best results, set the paper type and size before printing or copying. For more
information, see the onscreen HP Image Zone Help.
To load postcards or Hagaki cards in the input tray
1 Remove the output tray.
2 Remove all paper from the input tray.
3 Insert the stack of cards into the far right side of the input tray with the short edge
forward and the print side down. Slide the stack of cards forward until it stops.
4 Slide the paper-width guide inward against the stack of cards until it stops.
Do not overload the input tray; make sure the stack of cards fits within the input tray
and is no higher than the top of the paper-width guide.
5 Replace the output tray.
Load envelopes
You can load one or more envelopes into the input tray of your HP all-in-one. Do not
use shiny or embossed envelopes or envelopes that have clasps or windows.
Note For specific details on how to format text for printing on envelopes, consult the
help files in your word processing software. For best results, consider using a
label for the return address on envelopes.
To load envelopes
1 Remove the output tray.
2 Remove all paper from the input tray.
3 Insert one or more envelopes into the far right side of the input tray with the
envelope flaps up and to the left. Slide the stack of envelopes forward until it stops.
Chapter 5
30 HP Officejet 6200 series all-in-one
Load originals and load paper