Filter
Top Products
Tip You can also enlarge a small photo to fit within the printable area of a full-size
page. In order to do this without changing the proportions of the original or
cropping the edges, the HP all-in-one might leave an uneven amount of white
space around the edges of the paper.
To resize a document from the control panel
1 Make sure you have paper loaded in the input tray.
2 Load your original face down on the right front corner of the glass or face up in the
document feeder tray.
Place the page in the document feeder tray so that the top of the document goes in
first.
3 In the Copy area, do one of the following:
– If you loaded your original in the document feeder tray, press Reduce/Enlarge
until Full Page 91% appears.
– If you want to use Fit to Page, press Reduce/Enlarge until Fit to Page
appears.
4 Press Start Copy Black or Start Copy Color.
Resize an original using custom settings
You can use your own custom settings to reduce or enlarge a copy of a document.
To set a custom size from the control panel
1 Make sure you have paper loaded in the input tray.
2 Load your original face down on the right front corner of the glass or face up in the
document feeder tray.
3 In the Copy area, press Reduce/Enlarge until Custom 100% appears.
4
Press
or use the keypad to enter a percentage to reduce or enlarge the copy,
and then press OK.
(The minimum and maximum percentage to resize a copy varies by model.)
5 Press Start Copy Black or Start Copy Color.
Copy a legal-size document onto letter paper
You can use the Legal > Ltr 72% setting to reduce a copy of a legal-size document to a
size that fits onto letter paper.
Note The percentage in the example, Legal > Ltr 72%, might not match the
percentage that appears in the control panel display.
1 Make sure you have paper loaded in the input tray.
User Guide 41
Use the copy features