Filter
Top Products
Note You can only send and receive faxes by connecting a phone cord to the port
labeled "1-LINE" on the HP all-in-one and not from the Ethernet port. This means
that your connection to the Internet must be done either through a converter box
(which supplies regular analog phone jacks for fax connections) or your
telephone company.
The FoIP service might not work properly when the HP all-in-one is sending and
receiving faxes at high speed (33600bps). If you experience problems sending and
receiving faxes, use a slower fax speed. You can do this by changing the Fax Speed
setting from High (the default) to Medium. For information on changing this setting, see
Set the fax speed.
You should also check with your telephone company to make sure their Internet phone
service supports faxing. If they do not support faxing, you will not be able to send and
receive faxes through the Internet.
Stop faxing
You can cancel a fax you are sending or receiving at any time.
To stop faxing from the control panel
➔
Press Cancel on the control panel to stop a fax you are sending or receiving. Look
for the Fax Cancelled message on the control panel display. If it does not appear,
press Cancel again.
The HP all-in-one prints any pages it has already started printing and then cancels
the remainder of the fax. This can take a few moments.
To cancel a number you are dialing
➔
Press Cancel to cancel a number you are currently dialing.
Chapter 11
96 HP Officejet 6200 series all-in-one
Use the fax features