Filter
Top Products
6
Use a PictBridge camera
The HP all-in-one supports the PictBridge standard, which lets you connect any
PictBridge-compatible digital camera to the camera port and print JPEG photos
contained on the memory card in the camera. The photos are printed directly from the
digital camera. For more information about printing from your camera, see the
documentation that came with your digital camera.
To print photos from a PictBridge-compatible camera
1 Make sure the HP all-in-one is turned on and that the initialization process is
finished.
2 Connect your PictBridge-compatible digital camera to the camera port on the front
of your HP all-in-one using the USB cable supplied with your camera.
3 Turn on your camera and make sure it is in PictBridge mode.
Note When the camera is connected correctly, the status light next to the camera port
blinks while the camera is being accessed. The light also stops blinking and
stays lit when printing from the camera.
If the camera is not PictBridge-compliant or is not in PictBridge mode, the status
light blinks amber and an error message displays on your computer monitor (if
you have the HP all-in-one software installed). Disconnect the camera, correct
the problem on the camera and reconnect. For more information about
PictBridge camera port troubleshooting, see the 6200 series Troubleshooting
section in the HP Image Zone Help.
After you successfully connect your PictBridge-compliant camera to the HP all-in-one,
you can print your photos. Make sure the size of the paper loaded in the HP all-in-one
matches the setting on your camera. If the paper size setting on your camera is set to
the default, the HP all-in-one uses the paper that is currently loaded in the input tray.
Refer to the user guide that came with your camera for detailed information on printing
from the camera.
Tip If your digital camera is an HP model that does not support PictBridge, you can
still print directly to the HP all-in-one. Connect the camera to the USB port on the
back of the HP all-in-one instead of to the camera port. Direct-printing from the
back port works with HP digital cameras only.
User Guide 33
Memory Card and PictBridge