Filter
Top Products
98 7 Faxing EN
To change the silence detect mode
1 Press menu/enter.
2 Use the < and > buttons to select Fax Setup and press menu/enter.
3 Use the < and > buttons to select Fax Recv. Setup and press menu/enter.
4 Use the < and > buttons to select Silence Detect and press menu/enter.
5 Use the < and > buttons to select On or Off.
Changing autoreduction settings for incoming faxes
If the fit to page option is on, the product automatically reduces long faxes to fit on the product’s
default paper size (up to a 75% reduction), for example from legal to letter size.
If the fit to page option is turned off, long faxes print at full size on multiple pages.
If you have the stamp received faxes option on, you may want to turn autoreduction on also. This
reduces the size of incoming faxes just slightly and prevents the page stamp from forcing a
received fax page onto two pages.
Note Make sure the paper size setting matches the size of paper loaded in the paper input tray. To change
the default paper size, see Changing the default paper size.
To change autoreduction for incoming faxes
1 Press menu/enter.
2 Use the < and > buttons to select Fax Setup and press menu/enter.
3 Use the < and > buttons to select Fax Recv. Setup and press menu/enter.
4 Use the < and > buttons to select Fit to Page and press menu/enter.
5 Use the < and > buttons to select On or Off and press menu/enter to save your selection.
Note The default set at the factory for incoming fax autoreduction is On.
Enabling stamp received faxes
The HP LaserJet 3330 product is set up to print the sender’s identification at the top of each
received fax. You can also choose to have your header information included on each received fax
to confirm the date and time the fax was received.
Note This option only applies to received faxes that are printed by the product.
To enable stamp received faxes
1 Press menu/enter.
2 Use the < and > buttons to select Fax Setup and press menu/enter.
3 Use the < and > buttons to select Fax Recv. Setup and press menu/enter.
4 Use the < and > buttons to select Stamp Faxes and press menu/enter.
5 Use the < and > buttons to select On or Off and press menu/enter to save your selection.