Hitachi 3300MFP Printer User Manual


 
EN Interpreting the configuration page 209
23
UNABLE TO ATTACH TO
QUEUE
A failure was detected when the print server tried to attach to one of the
queues assigned to the print server object. This may be because no
servers are allowed to attach to this queue. There may also be a networking
or security problem. Use PCONSOLE to make sure that servers are
allowed to attach to the queue, to delete the print server object from the list
of queue servers if you want the print server to service other queues, or to
delete the queue and create a new one (the print server object must be
added to the list of queue servers).
Note: When the print server is configured for multiple file servers, the error
is only displayed on the configuration page if none of the file servers was
successfully connected.
24
PSERVER CLOSED
CONNECTION
The NetWare print server requested a termination of the connection with
the print server. No error exists or is indicated. Make sure the NetWare print
server is running, and restart it if necessary.
25
DISCONNECTING - SPX
TIMEOUT
The SPX connection to the print server was lost after the connection had
been made. This indicates a possible network problem, or a problem with
the print server. Make sure all cables and routers are functioning correctly.
Try restarting the print server.
26
UNKNOWN NCP RETURN
CODE
The print server encountered an unexpected fatal error after it had
successfully connected to the file server. A wide variety of failures could
produce this error message, including a downed file server or a network
router failure.
27
UNEXPECTED PSERVER
DATA RCVD
The print server sent some data when the print server had not given its
permission to do so. This indicates a possible print server problem, possibly
a software problem.
28
OUT OF BUFFERS
The print server was unable to allocate a buffer from its internal memory.
This indicates all buffers are busy due possibly to heavy broadcast traffic or
large amounts of network traffic directed to the print server.
29
UNABLE TO SENSE NET
NUMBER
The print server has been trying for more than three minutes to determine
the NetWare protocol used on the network. Make sure that any file servers
and routers are operating correctly. Make sure that the settings for NetWare
frame type and source routing are correct.
2A
NDS ERR: EXCEEDS MAX
SERVERS
More queues were assigned than the print server can handle. Remove one
or more print queues from the list to be serviced by Queue Server Mode.
2B
NDS ERR: UNABLE TO
LOGIN
Unable to log onto the NetWare directory tree. Make sure that the print
server object is defined in the directory at the correct context. Clear the
print server password using NWADMIN or similar NetWare tool.
2C
AUTHENTICATION ERROR
Unable to log onto the NetWare directory tree. Make sure that the print
server object is defined in the directory at the correct context.
Error Code and Message Description